1 / 5
| DC48V Series | ||||||||||
| rated power | 1KW | 2KW | 3KW | 4KW | 5KW | 6KW | 8KW | 10KW | 12KW | |
| Rated DC voltage | DC48V | |||||||||
| Battery voltage range | DC40-64V | Low voltage warning | 44V | |||||||
| Low voltage power outage | 42V(40-48V(ADJ) | |||||||||
| Low voltage recovery | 54V | |||||||||
| High voltage power outage | 63V(61-64V ADJ) | |||||||||
| High voltage recovery | 62V | |||||||||
| Low voltage shutdown | 38Vdc | |||||||||
| DC priority type | Low voltage switching of battery to mains voltage point | 44V(42-51V) | ||||||||
| Return to the battery supply voltage point after sufficient supply | 52V(48-58V) | |||||||||
| Communication input | Rated AC input voltage | AC220V | AC110V | ||||||||||
| Scope of communication input | 170-280Vac(UPS) 90-280Vac(APL) |
||||||||||||
| Voltage drop point due to under voltage of the municipal power supply | 170Vac±5V (UPS) 90Vac±5V (APL) |
||||||||||||
| Under voltage recovery point of municipal power supply | 180Vac±5V (UPS) 100Vac±5V (APL) |
||||||||||||
| Overvoltage and power failure voltage point of mains power | 280Vac±5V | ||||||||||||
| Overvoltage recovery voltage point of mains power | 270Vac±5V | ||||||||||||
| Communication input frequency | 50HZ/60HZ(ADJ) | ||||||||||||
| Frequency range | 40-65HZ | ||||||||||||
| Single mains power on function | yes | ||||||||||||
| UPS conversion time | <5ms(UPS); <13ms(Electrical mode) | ||||||||||||
| AC output | AC output voltage | 220/230/240Vac±3% ADJ | |||||||||||
| Communication output frequency | 50±1HZ/60±1HZ | ||||||||||||
| Output waveform | Pure sine wave (full voltage range) | ||||||||||||
| Waveform distortion rate | ≤3%(Linear Load) | ||||||||||||
| Inverter peak efficiency | 95% | ||||||||||||
| Dynamic response | (0~100%)≤5% | ||||||||||||
| Power factor | >0.9 | ||||||||||||
| Peak power (surge capability) | Twice the rated power in 3 seconds | ||||||||||||
| Idle power consumption (standby power consumption) | 30W | ||||||||||||
| power derating | No derating (output power will not decrease with the decrease of battery voltage) | ||||||||||||
| work environment | Noise (1 meter) | ≤40dB | |||||||||||
| Environmental temperature for use | -40℃~+50℃ | ||||||||||||
| Storage environment temperature | -40℃~+70℃ | ||||||||||||
| humidity | 0~90% | ||||||||||||
| Using altitude (m) | ≤ 5000 (If it is higher than 1000, the usage will be reduced by 10% per liter starting from 1000) | ||||||||||||
| Continuous running time | Can run continuously for a long time | ||||||||||||
| Cooling method | Temperature controlled variable speed fan for heat dissipation | ||||||||||||
| Mean time between failures | Not less than 100000 hours | ||||||||||||